GMT red-back insert check, please.

Discussions regarding vintage Rolex and Tudor watches, parts and novelties
Post Reply
TripleTriangle
Posts: 2
Joined: Fri Mar 22, 2019 8:46 am
Location: Bay Area
Favorite Watch: 6610, 5513, 1675...

GMT red-back insert check, please.

Post by TripleTriangle »

Hello all,
Long time lurker, first time posting.
Looking at an insert and I have some doubts about authenticity. I have poured over pics, but keep vacillating between genuine and fake.

Areas of concern:
The nose of the 4 (seems like "Flatnose four"), but I've only seen those in black as per John's posts here and on various forums.
The outline of the numbers are not sharp/clean, but most examples I am comparing against seem to have rather sharp lines.

Things that seem promising:
The fading (front and back) seems not so out of line with others I've seen.
The "serifing" on some numbers seem consistent with some others I've seen.
The 6 seems to match well with other known genuine examples.

I'm leaning towards not legit, but bezel inserts seem to be the nut I can not crack in vintage watches. So, I thought I'd post here and get some advice from the pros.

On to the pics:

Image

Image

Image

Image

Once again, thank you to any and all that take the time to share their knowledge!
User avatar
springer
Posts: 275
Joined: Sun Nov 16, 2014 6:32 pm
Location: Dallas, TX, USA
Favorite Watch: GMT-Master

Re: GMT red-back insert check, please.

Post by springer »

The insert appears genuine. I don't believe it is possible to fake and age an insert like the one depicted.

Have a great weekend.
TripleTriangle
Posts: 2
Joined: Fri Mar 22, 2019 8:46 am
Location: Bay Area
Favorite Watch: 6610, 5513, 1675...

Re: GMT red-back insert check, please.

Post by TripleTriangle »

John, thank you so much for your quick reply, very much appreciated!!!
Mikedavid
Posts: 1
Joined: Tue May 24, 2022 5:24 pm
Location: New zealand
Favorite Watch: 16710 Coke

Re: GMT red-back insert check, please.

Post by Mikedavid »

Yes genuine, all of the counterfeit inserts I have seen the bottoms of the 2s are always flat and don't curve to the interior edge of insert.
Post Reply